4.4.3. "SPEED LIMITER" mode
When starting the engine, the "SPEED LIMITER" func-
tion is disabled. In order to activate it, it is necessary to
perform the following operations:
Press "SET" in order to access to "SPEED LIM-
ITER" mode. The maximum speed value shown on the
display (equal to the current speed of the vehicle) starts
blinking.
NOTE: The maximum speed may be changed
or set even during the use of the vehicle.
Press "SET" for less than three seconds: the maxi-
mum speed value is decreased of 2 km/h with refer-
ence to the one shown on the display. On the other
hand, if you press "OK" for less than three seconds, the
maximum speed value is increased of 2 km/h with ref-
erence to the one shown on the display.
OPERATION
- 43 -
4
4