4.8.
Removing the side case
Unscrew and remove the lower side case safety pin.
Rotate counterclockwise the rear side lamp connec-
tor and pull it off.
Rotate the rear key to release the side case fixing
lock. While holding the side case with the other hand,
remove it by pulling it towards the rear side of the bike.
When reassembling the side case on the bike, perform
4
inversely the removal operations.
WARNING: Every time you assemble the side
case and every time the vehicle is used, make
sure that the above mentioned part is correct-
ly placed and that it is firmly secured to the
motorcycle framework. Moreover, make sure
that the rear side lamp connector is correctly
inserted and that the rear lamp is working.
WARNING: Never exceed the maximum
allowed speed of 180 km/h when the side
cases are assembled on the bike. In any case,
always respect traffic laws and never exceed
stated speed limits.
OPERATION
- 80 -
4