Operating Elements; Before Commissioning - Windsor Saber Blade 16 Instrucciones Importantes De Seguridad

25
24
1 Lock for solution tank
2 Switch for brush drive
3 Solution switch
4 Solution hose
5 Dust filter (suction)
6 Lock of pushing handle
7 Release button for the transport
wheel
8 Bearing wheel
9 Push handle
10 Strain relief clamp
11 Support of the transport wheel
12 Clip
13 Solution tank
14 Recovery tank
15 Push-button for squeege change
16 Shut off float
17 Button for brush change
18 Chassis
19 Squeegee
20 Brushes
21 Rotating handle for brush contact
pressure
22 Pedal to lower squeegee
23 Electrical plug
24 Carrying handle for recovery tank
25 Solution tank cover

Operating elements

Before Commissioning

Installing the pushing handle
Slide the upper slider half onto the
lower slider half.
Warning
Risk of damage. Do not pinch the cable
during the installation.
Align the borings (2 possible height
adjustments).
Connect the slider halves to the lock
screws, discs and star grips.
Fasten the cable to the slider using
clips.
Installing the transport wheels
Insert the transport wheel axles into
the borings on the appliance and
lock them.
Installing the Brushes
The brushes must be installed before
the initial operation (see "Maintenance
works").
5
English