Replace the batteries if:
• The weak battery symbol appears on the display.
• Nothing appears on the display when the power is
switched on.
Note:
•
Date and time will need to be reset if batteries are
removed or replaced.
•
Replace all batteries at one time (as simultaneous set).
Use only 1.5V "AAA" alkaline batteries.
•
When the batteries are removed, the measurement
values stored in memory are retained. However, the
date and time must be reset.
•
Remove batteries when unit is not in use for extended
periods of time.
•
Clean contacts on battery and in battery compartment
with a soft dry cloth each time you install batteries.
•
Batteries are hazardous waste. Do not dispose of
them together with the household garbage.
13