Hardware Kit; General Assembly Information; Assembly Steps - Tunturi Cardio Fit Row R30 Manual Del Usuario

The package contains the fasteners as
shown in figure.
If a part is missing, contact your dealer
GENERAL ASSEMBLY
WARNING
• Assemble the equipment in the given
order.
• Carry and move the equipment with
at least two persons.
CAUTION
• Place the equipment on a firm, level
surface.
• Place the equipment on a protective
base to prevent damage to the floor
surface.
• Allow at least 100 cm of clearance
around the equipment.
8

HARDWARE KIT

INFORMATION
Refer to the illustrations for the correct
assembly of the equipment.

ASSEMBLY STEPS

Assembly step 1
• Fit front stabilizer.
• Connect the sensor wires with the
console.
• Fix the console to the console
bracket. (use the two screws already
present on the console rear cover).
Remark:
Avoid the wires to damage during
assembly