Tunturi Cardio Fit Row R30 Manual Del Usuario página 9

Assembly step 2
• Attach the pedal support tube to
bottom of the main frame. Fix by
using the shown hardware
• Attach the left pedal to the left
bracket of the pedal support tube
• Slide the axle through the left pedal.
Fix by using the shown hardware.
• Repeat the same procedure for right
pedal
User manual • Cardio Fit Row R30
Assembly step 3
• Insert the slide rail onto the U type
connect tube. Fix by using the shown
hardware
• Attach two end collars to the front of
the slide rail and securing the end
collars with allen bolts.
• Slide the seat onto the slide rail.
Then attach other two end collars to
the back of the slide rail and securing
with allen bolts.
• Attach the end caps onto the back of
the slide rail.
• Attach rear stabilizer to back of the
slide rail. Fix by using the shown
hardware
Remark:
First put all screws/ bolts in correct place
before tightening them fully.
GB
9