Setting Up The Furnace Operation - Amann Girrbach ceramill therm s Manual Del Usuario

I N S T A L L A T I O N

5.4.2 Setting up the furnace operation

Operation via browser
E N
For operation of the furnace via Web inter-
face, your browser must be Java-capable
and Java must be activated.
▷ Start a Java-capable browser (e. g. Internet
Explorer or Mozilla Firefox) on a computer in the
network.
▷ Enter the noted down IP address in the
browser's address line (e. g.,
"http://192.168.115.156") and press
The Login window is displayed.
Fig. 5 Login window
▷ Enter the password in the
▷ Select the desired data compression for the
data transfer between the furnace and the com-
puter.
We recommend the standard setting
RL encoding
▷ Click
OK
The Programme Manager is displayed in the
browser.
▷ Installing a fixed IP address for the furnace in
the Programme Manager (see Chapter 5.4.3.).
54
Password
.
.
Operation via VNC software
Enter
.
▷ Start a VNC software (e. g. RealVNC or
UltraVNC) on a computer in the network.
The start window is displayed.
▷ In the
address (for example "192.168.115.200").
▷ Click
The login window is displayed.
▷ Enter the password in the
The default password is "DEKEMA".
▷ Click
The Programme Manager is displayed in the
entry line.
VNC window.
▷ Installing a fixed IP address for the furnace in
the Programme Manager (see Chapter 5.4.3.).
For comfortable calling up of the furnace
control system, you can define a book-
mark in the browser:
▷ Enter the fixed IP address in the browser
and start the Java application.
▷ Wait until the Programme Manager is
indicated.
▷ Define the bookmark.
For operation of the furnace via VNC, a
suitable VNC software must be installed
on the computer.
Server entry line, enter the noted down IP
OK
.
Password
OK
.
entry line.