Installing A Fixed Ip Address For The Furnace - Amann Girrbach ceramill therm s Manual Del Usuario

5.4.3 Installing a fixed IP address for the furnace

Depending on the network settings, a different IP
address is used for each restart of the unit. To
avoid repeated finding and transferring of the IP
address, a fixed IP address should be assigned to
the furnace in the network.
Fig. 6 Menu Setup > Network
▷ In
Default IP-Adresse (Default IP address)
the IP address assigned to the furnace.
▷ In
Default Subnet Maske (Default Subnet Mask)
enter the subnet mask assigned to the furnace.
▷ In
Gateway
, enter the gateway address assigned
to the furnace.
▷ Tap on the
DHCP aktiv (DHCP active)
deactivate the DHCP function.
▷ Have the network administrator assign an IP
address, a subnet mask and a gateway address
for the furnace.
▷ In the
Setup
work)
function.
▷ Click
OK
, enter
The furnace now has a fixed IP and can be
, responded to via a browser or the VNC software
under this address.
The new IP address will not be activated
button to
until after restarting the furnace.
I N S T A L L A T I O N
Netzwerk (Net-
menu, call up the
.
E N
55