Temperature Calibration; Communication - Amann Girrbach ceramill therm s Manual Del Usuario

9.2.2 Check programme
▷ See Chapter 11.2.2 on Page 83.

9.2.3 Temperature calibration

▷ See Chapter 11.2.1 on Page 81.
Fig. 18 Setup > Quality management
The furnace logs the last ten completed firing pro-
grammes. For more than ten completed firing pro-
grammes, these QM files are overwritten on a
rolling basis.
_
OK
accepts the settings and returns to the
Setup
menu.
_
Letztes file (Last file)
of the last completed firing programme.
displays the QM file name
9.3

Communication

9.3.1 Quality management
▷ In the
Setup
menu, tap on the
agement (Quality management)
The quality management window is displayed.
_
USB-Protokollierung (USB logging)
vates/deactivates the data recording on an
external USB stick. A coloured button indicates
that this function is active. Through this, the QM
files are additionally updated on this USB stick
(USB logging).
S E T U P M E N U
Qualitäts-Man-
button.
acti-
E N
75