Settings - Amann Girrbach ceramill therm s Manual Del Usuario

S E T U P M E N U
9.1

Settings

9.1.1 Network
E N
▷ In the
Setup
work)
button.
The window with the network settings of the
furnace is displayed. The current network
addresses are displayed.
Fig. 15 Setup > Network
Buttons:
_
OK
accepts the settings and returns to the
Setup
menu.
The changed settings will not be activated until
after restarting the furnace.
_
DHCP aktiv (DHCP active)
have an IP address assigned by your network
72
Netzwerk (Net-
menu, tap on the
allows the furnace to
server. A coloured button indicates that the
DHCP function is active.
_
DHCP renew
(only when DHCP is active) allows
the furnace to have a new IP address assigned
automatically by your network server.
_
set default IP
(only when DHCP is not active)
assigns the default IP address to the furnace.