Brema5 - Brema LF
English
1. Introduction - Scope of the manual/Field of application
This instruction manual refers to the Brema 5 - Brema LF refrigerated cabinets.
The information that follows provides indications relating to:
- Use of the cabinet - technical features- installation and assembly - information for the operator in
charge of use - maintenance interventions.
This manual is to be considered part of the cabinet and must be preserved for its entire duration.
The manufacturer cannot be held responsible for:
- Improper use of the cabinet - incorrect installation not carried out in compliance with the standards
indicated - electric power supply faults - lack of envisioned maintenance - unauthorised modifications
and interventions - use of non original spare parts - partial or total non observance of the instructions.
This manual must be available at all times for consultation by the operators and the staff in charge of
maintenance. In case of transfer to third parties, this manual must be provided to the new user or
owner. The supplier must also be informed of the transfer.
In case of damage or loss, request a copy from the supplier.
N.B.Electric appliances may be dangerous for ones health. Regulations and existing laws in
force must be respected during installation and use.
Whoever uses this cabinet must read this manual.
2. Presentation - Foreseen use (Fig. 1)
The line of refrigerated cabinets Brema 5 - Brema LF consists of multi-deck display cabinets closed on
the front by glass doors, with remote condenser unit, suitable for the storage and self service sale of
Frozen foods and Ice cream.The cabinets come in several versions: 2 Doors - 3 Doors - 4 Doors - 5
Doors. The doors can be supplied in aluminum or silk-screen decor.
3. Standards and certifications
All the refrigerated unit models described in this user's manual for the Brema 5 - Brema LF series
meet basic health, safety and protection requirements set out by the following European laws and
directives:
- Machines Directive 2006/42 EC;
harmonised standards applied: EN ISO 14121:2007; EN ISO 12100-1:2005; EN ISO 12100 2:2003
- Electromagnetic Compatibility Directive 2004/108/EC;
harmonised standards applied: EN 61000-3-2:2006; EN 61000-3-12:2005; EN 55014-1:2006;
EN 55014-2:1997;
- Low Voltage Directive 2006/95/EC;
harmonised standards applied: EN 60335-1:2008; EN 60335-2-89 :2002/A2:2007
European Regulation EC-1935/2004 on materials and articles intended to come into contact with food
- standards applied: EN 1672-2
They are excluded from the field of application of Directive EEC 97/23 (PED) on the basis of that
specified by Article 3 paragraph 3 of the Directive.
A copy of the declaration of product conformity can be requested by filling in the form available
at the internet address:
The performance of these refrigerated units has been determined by means of tests carried out in
accordance with standard UNI EN ISO 23953-2: 2006 in the environmental conditions corresponding
to climate class 3 (25 °C , 60% Rel. Humidity)
Environmental climatic classes according to UNI EN ISO 23953 - 2
Climatic class
1
2
3
4
5
6
4. Identification - Nameplate (Fig. 2)
The technical nameplate is situated on the back of the cabinet with all the technical characteristics:
1) Manufacturer's name and address
2) Name and length of the cabinet
26
http://
www.arneg.it/conformity
Temp. dry bulb
Relative humidity
16°C
22°C
25°C
30°C
40°C
27°C
Dew point
80%
12°C
65%
15°C
60%
17°C
55%
20°C
40%
24°C
70%
21°C
05060047 03 24/02/2010