Cutting Performance; Tecnical Characteristics; Cutting Capacity - Sima CX-16 Manual De Instrucciones

2. Unscrew both ends of carbon brushes.
3. Replace the brushes.
4. Re-threading the tops of the brushes

13. CUTTING PERFORMANCE

To performance an adequate cut, we will proceed as follows:
1. Place the iron bar between the knives.
2. Adjust the stop bar.
3. Connect the machine.
4. Press the trigger until cut the rod and the piston completely back to stay in place.
CAUTION: There is always a possibility that the cut end can be ejected powerfully, especially if the piece has less than
30cm in length.

14. TECNICAL CHARACTERISTICS

MODEL
MOTOR TENSION
MOTOR POWER
DIMENSIONS
WEIGHT
CUTTING SPEED

14.1 CUTTING CAPACITY

Ø MIN. CUTTING CAPACITY
Ø MAX CUTTING CAPACITY
CX-16
220/230V 110V
50/60Hz 60Hz
850W 900W
465x230x155
8Kg
2,5-3"
Elastic limit R=N/mm² 650
Tensile strength R=N/mm² 850
8
CX-20
220/230V 110V
50/60Hz 60Hz
950W 1250W
405x120x220
13Kg
3-3,5"
CX-16 CX-20 CX-25
Ø4 Ø4
Ø16 Ø20 Ø25
CX-25
220/230V
50/60Hz
1600W 1700W
485x150x260
24,5Kg
5-5,5"
Ø4
.
110V
60Hz