3- Technical Description; Data Plate And "Ce" Marking; Names Of Components And Dimensions - TOPP T80 Instrucciones Para La Instalación Y El Uso

EN

3- TECHNICAL DESCRIPTION

3.1- DATA PLATE AND "CE" MARKING

The "CE" marking certifies the compliance of the machine with the essential health and
safety requirements established by product European Directives.
The data plate is an adhesive polyester plate, silk-screen printed in black, with the
following dimensions: L = 65 mm - H = 24 mm.
It is applied to the outside of the actuator. The plate contains the following legible and
indelible information:
• manufacturer's logo and address
• type and model
• voltage and intensity of power supply (V-A)
• type of service S2 (min)
• electrical power input P(W)
• thrust and traction F (N)
• no-load translation speed (mm/s)
• protection degree (IP)
• double insulation symbol (only for mod. 230 V)
• symbol of WEEE Directive 2002/96/CE
• CE marking
• serial number
• year of construction

3.2- NAMES OF COMPONENTS AND DIMENSIONS

Fig. 2 illustrates and names the main components of the actuator.
28 INSTALLATION AND USE INSTRUCTIONS
T80