Publicidad
Idiomas disponibles
Idiomas disponibles
2
4
7
1
3
5
6
8
8
7
6
10
15
Premounting the kick starter shaft (all parts included)
1
2
3
4
9
5
6
10
7
12
8
9
13
10
11
11
12
13
Assembly order:
- Mount the stop disk (7) (included), starter wheel (8) (included) and stop
5
disk (9) (included) on the kick starter shaft (10) (included).
- Mount the lock ring (6) (included).
- Mount the kick starter spring (5) (included).
NOTE:
The end of the kick starter spring (5) (included) must engage in the hole
(14).
- Mount the driving hub (9) (included) and stop disk (8) (included).
- Mount the kick starter ratchet wheel (11) (included).
NOTE:
The marking (15) must be aligned with the hole (14).
14
11
- Mount the ratchet wheel spring 1.4mm (13) (included).
13
- Apply a small amount of grease to the contact surface (A).
- Mount the thrust washer DIN0988-16X22X1 (12) (included).
16
A
Distance sleeve 16x23x26x6.1
Shaft seal ring 17x28x7
Stop disk 17.2x24x1
Driving hub
Kick starter spring
Lock ring DIN0471-17X1
Stop disk 17.2x24x1
Starter wheel 28 teeth
Stop disk 17.2x24x1
Kick starter shaft
Kick starter ratchet wheel
Thrust washer DIN0988-16X22X01
Ratchet wheel spring 1.4mm
13
Publicidad
