User Administration: „System/Maintance"-„User - Xylem SI Analytics AVS 370 Manual De Instrucciones

User administration: „System/Maintance"-„User"
4.10
The program WinVisco 370 has a user administration for users to possess different levels of
authorization depending on their user level. In order to activate this user administration, you must
make a change in the file "application.ini". The file "application.ini" is located in the installation
directory, usually "C:\Programme\AVS_370\". The file "application.ini" can be opened with the
Windows program "Editor".
When activating user administration, you must enter the number "1" instead of "0" after "user=" in the
4th line. Save the file "application.ini".
If the user administration is activated, a key icon will appear in the "Method/Results" tab in "AVS-
Center".
Fig. 13 User administration activated: Key icon will appear
In order to manage users, go to "System/Maintenance" and select the "User" tab.
The input window "WinVisko Security" will appear.
Fig. 14 Logging into user administration
After the installation, you can first log in with the user idea "Admin" and no password as the
administrator. In the software WinVisco 370, you distinguish between 3 user levels:
„Normal operator"
Level 1
Alle powers of
level 1
Level 3 Administrator
has the authorisation to load and save methods,
to input parameters (no formulae) and to select viscometers
+ the authorisation to modify methods (e.g.measurement method),
delete parameters, create new parameters, modify formulae,
administer viscometers.
All powers of level 2 plus operator administration
65