Servicing & Repair; Fuse Replacement; Limited Warranty - Cuda surgical LED-4000 Manual De Uso

Optic Cleaning Procedure
Step #1
First use compressed air (aerosol can) to remove surface dust without directly contacting
any coating the optic may have. (Wiping a dusty optic with cotton swabs or lens paper can
abrade and damage the optic.)
Step #2
Soak with solvent a Cotton-Tipped Swabs or Lens Tissue then use a circular motion
starting from the edge of the optic moving towards the center to wipe away any dust or dirt.
Repeat as necessary, each time use a new cotton swab or lens tissue.
8. SERVICING AND REPAIR
Defective items are to be serviced and repaired exclusively by persons authorized by the
manufacturer. All repair work shall employ original manufacturer's parts only.

8.1 FUSE REPLACEMENT

Always disconnect power cord and turn main switch off before fuse
replacement.
CAUTION
Turn light source off and unplug power cord. On back of unit remove the fuse holder located
in the power cord receptacle and pull out fuse holder. Users should use 2A Fast-acting
250VAC rated fuses. Insert holder back into fuse housing.
Re-connect the power cord and turn the LED light source on according to section 6.1.

8.2 LIMITED WARRANTY

Your LED-4000 light source carries a 3-year warranty from the date of shipment on
workmanship and all defects of material. Should your product prove to have such defects
within three years from the date of shipment from ST Technologies, we will repair or
replace the product or component part without charge. Should your LED-4000 light source
need servicing under this warranty, please contact ST Technologies for return
authorization documentation. You should carefully pack the unit in a sturdy carton and ship
it to the factory. Please include a note describing the defects, your name, telephone
number and a return address. Warranty does not cover equipment subject to misuse,
accidental damage, normal wear and tear or if transferred to a new owner without
authorization from ST Technologies.This warranty gives you specific legal rights and you
may also have other rights that vary from state to state.
POST WARRANTY REPAIRS: You may return your product(s) for repair, shipping prepaid to
the factory. Your product will be inspected and an estimate of repair charges will be submitted
to you for approval. Payment must be received before repairs are completed.
•
In the US:
•
FAX number:
•
Customer Service
®
LIT-216 CUDA
SURGICAL
(English)
877 814 2237 (toll free)
904 733-4832
904 208 2290
Date of Revision:07/12/18
Rev. B
Page 12 of 112