Introduction; Indications For Use - Cuda surgical LED-4000 Manual De Uso

1. INTRODUCTION

Congratulations on the purchase of your new LED-4000 Light Source!
This user-friendly, high efficiency LED light source utilizes state-of-the-art illumination
technology. It offers a variety of features such as:
Quiet operation
•
• Long life, >30,000 hrs.
Compact and light weight
•
• Pulse-width Modulation (PWM) Electrical Dimming
Ergonomic turret whichacceptsvarious types of light guides, typically, ACMI,
•
Wolf, Olympus and Storz
Sensor automatically shuts off LED when light guide is removed
•
• LLS-4000T-SC provides 75 CRI and 6500K color temperature (nominal)
LLS-4000T-HC provides 92 CRI and 5600K color temperature (nominal)
•
In short, you have chosen the best and we would like to make sure you receive the optimal
results with your new LED light source by using it correctly.
This Operator Manual will help you to install the device and integrate it with other
components of your system. It will also instruct you how to operate the LED light source
and how to keep it clean. It will give you maintenance and service guidelines as well as
recommendations for best performance results.
1.1 INDICATIONS FOR USE: The LED light source is used to illuminate the site of
surgery during minimally invasive surgical procedures in arthroscopy (orthopedic
surgery), laparoscopy (general and gynecological surgery) and in Endoscopy
(general, gastroenterological and ENT surgery) The light is typically transmitted from
the light source through a fiber optic cable and a scope.
®
LIT-216 CUDA
SURGICAL
(English)
Rev. B
Date of Revision:07/12/18
Page 3 of 112