WEG KVDC-CFW11-2 Guia De Instalacion página 11

External Power Supply for Control in 24 Vdc - KVDC-CFW11-2
Step Actions/Instructions
11
Only frame sizes F and G
Remove the ground cable from J7 connector on the power interface board (DFO2x).
12
Only frame sizes F and G Only frame size H
Remove the three ground screws from the
power interface board (DFO2x) as indicated. Remove the two ground screws from the
Note: some inverters do not feature the power interface board (IPHx) as indicated.
lower left ground point.
CFW-11/CFW70X | 11