WEG KVDC-CFW11-2 Guia De Instalacion página 8

External Power Supply for Control in 24 Vdc - KVDC-CFW11-2
Step
3
Remove the two screws at the ends of the lower front cover and remove it.
4
Remove the two screws at the ends of the upper cover and remove it.
5
Remove the plastic cover on the connector and the ribbon-cable.
Be careful not to damage the components on the board close to the connector.
8 | CFW-11/CFW70X
Actions/Instructions
Frame sizes D, F, G and H
Only frame size H
Only frame sizes F and G