WEG KVDC-CFW11-2 Guia De Instalacion página 9

Step
6
7
Only frame sizes D and H
Remove the ground cable from XC98 of the
vertical board of the control board, the plastic
cover on the connector and the ribbon-cable.
Be careful not to damage the components on
the board close to the connector.
Note: this cable was added during the CE
certification. Some drives do not have this cable.
External Power Supply for Control in 24 Vdc - KVDC-CFW11-2
Actions/Instructions
Only frame sizes D and H
Loosen the ground flexible braid on the screening plate.
Only frame sizes F and G
Using a screwdriver, release the control rack;
releasing the four locks.
CFW-11/CFW70X | 9