Control Panel - Clarke Vantage 17 Manual De Operacións

ENGLISH

CONTROL PANEL

(See Fig. 4)
Brush/Pad Rotation Switch (A, Fig. 4)
When it is turned to the "I" position, the machine is ready to start the brush/pad rotation. To start the brush/pad rotation, press and hold
one or both the activation switches (C, Fig. 4).
When it is turned to the "0" position, the brush/pad rotation is deactivated.
Water Vacuuming Switch (B, Fig. 4)
When it is turned to the "I" position, it starts the vacuuming of the recovery water.
When it is turned to the "0" position, it stops the vacuuming of the recovery water.
Activation Switches (C, Fig. 4)
When one or both the activation switches are pressed, the brush/pad rotation is activated.
The switches are active only if the brush/pad rotation switch (A, Fig. 4) is turned to the "I" position.
Figure 4
11
Operator's Manual - Vantage 17 Cable