Technical Specifications; Description Of The Display Unit; Structure; Refrigeration Unit - ifi SAM80 Manual Para El Uso Y Mantenimiento

1 TECHNICAL SPECIFICATIONS

1.1 DESCRIPTION OF THE DISPLAY UNIT

The unit essentially consists of two sections:

1.1.1 STRUCTURE

The supporting structure consists of a lower frame
(Fig.1 pos.1) in steel ducting and sheet metal
Above it is the mono-bloc tank (Fig.1 pos. 2) for
conserving and displaying foodstuffs, to which the
glass panels are attached. The front double glazed
panel (Fig.1 pos.3) can be opened by lifting it
Fig.1
4

1.1.2 REFRIGERATION UNIT

Models with water condensers or mixed air-water condensers are also available.

1.2 MODELS

The models available are:
- SAM80 VAD/VBD Ice cream display case 1125 - 1625 - 2125
- SAM80 VAD/VBD Pastry display case 1125 - 1625 - 2125 - Terminal
- SAM80 VAD/VBD Pastry refrigerated shelves 1125 - 1625 - 2125
- SAM80 VAD/VBD Praline 1125 - 1625 - 2125
- SAM80 VAD/VBD COLD/HOT 1125 - 1625
- SAM80 VAD/VBD HOT DRY 1125 - 1625
NOTE:
Components which are not in contact with the displayed ice-cream are made using AISI 304
steel or non-toxic plastic which is suitable for use with foodstuffs.
5
downward. The lower side panels of the display unit,
made of 3mm steel sheet, are painted (Fig.1 pos.4),
while the upper side panels are double-glazed and
heated double glazing (Fig.1 pos.5).
The remaining part of the display unit is made using
STAINLESS steel.
1 2
39
3