GB
2.8 ELECTRICAL CONNECTION
This procedure should be performed by an electrical
technician (in compliance with the current local
regulations of the country where the display unit is
installed).
Carry out the electrical connection procedure in
accordance with the system diagram.
ATTENTION!
be installed by an electrical technician in
compliance with current local regulations.
2.9 NOTES ON THE ENVIRONMENT
- Packaging
Do not discard any elements of the counter
packaging, but separate it according to the type of
material used (cardboard, wood, steel, polyester,
etc...) and dispose of these elements in accordance
with current legislation in the country where the
counter is operated.
- Disposal
When the counter can no longer be used, proceed
as follows:
Collect all the refrigerant from the circuit, drain all
the oil contained within the appliance for any reason,
remove all rubber parts (e.g. O-rings, seals) and send
it to be scrapped.
64
Fig.26