Assembly Of Sliding Doors - ifi SAM80 Manual Para El Uso Y Mantenimiento

GB
NOTE! Only after having approached and leveled all the display unit tighten the screws.
Fig.24c

2.7.3 ASSEMBLY OF SLIDING DOORS

- Introduce the sliding panels (Fig.25 Pos. F) if envisioned. The bottom sliding door should be placed in
the left , the upper on the right.
- The assembly operations of the sliding doors are shown in manual instructions enclosed.
F
Fig.25
NOTE:
The ice cream counter is equipped with the HCS sealing system that allows better storage
of the ice cream in the display unit.
The sensors inside the sliding panels are connected to the RDF defrost control which
suspends defrosting when the sliding panels are completely closed.
B
62
C
A
F