Installing This Product; Installation Notes - Pioneer AVIC-EVO1 Manual De Instalación

Section
03 Installation
! Before making a final installation of this
product, temporarily connect the wiring to
confirm that the connections are correct
and the system works properly.

Installing this product

Installation notes

! Do not install this product in places subject
to high temperatures or humidity, such as:
— Places close to a heater, vent or air con-
ditioner.
— Places exposed to direct sunlight, such
as on top of the dashboard.
— Places that may be exposed to rain,
such as close to the door or on the vehi-
cle's floor.
! Install this product in an area strong en-
ough to bear its weight. Choose a position
where this product can be firmly installed,
and install it securely. If this product is not
securely installed, the current location of
the vehicle cannot be displayed correctly.
! When installing, to ensure proper heat dis-
persal when using this product, make sure
you leave ample space behind the rear
panel and wrap any loose cables so they
are not blocking the vents.
! The cords must not cover the area shown
in the figure below. This is necessary to
allow the amps and navigation mechanism
to dissipate heat.
For details on the installation method for each
vehicle type, refer to the separate installation
manual and install this product properly.
20
Engb
Do not cover this area.