jbc CD-SE Manual De Instrucciones página 3

Adjustable stand Cable collector
Adjust the tool stand to suit Place the cable on the collector so that the working area is free
your work position. of cable.
Tip Cleaner
Select the option to suit your needs and improve the thermal transfer of the tip.
Splashguard
Ref. 0017576
It prevents splashing of solder particles
when using the brass wool.
Brass Wool
Ref. CL6210
Very effective
cleaning method.
Leaves a small layer
of solder on the tip
preventing oxidation
between cleaning
and rewetting.
4
(Ref. CC3702)
Antisplash Membrane
Ref. 0017574
Prevents splashing to maintain the work area
clean.
If the tip is very dirty,
JBC recommends first
cleaning it with the wiper
to remove excess solder.
Wiper
Ref. CL0160
A temperature resistant receptacle
for removing excess solder by gently
tapping or wiping.
Removing the splashguard:
1. Unlock the splashguard.
Lock
More cleaning options (not supplied):
Inox Wool
Ref. CL6205
Provides a superior
cleaning of the tip.
Wiper
Tapping:
Sponge Tap gently to remove excess
Ref. S0354 solder.
The least harmful cleaning
method. Keep the sponge
damp with distilled water
when working to avoid tip
wear.
w w w.jbctools.com
2. Remove it.
Metal Brush
Ref. CL6220
When used carefully, it
provides a more thorough
cleaning.
Wiping:
Use the slots to remove
remaining particles.
5