jbc CD-SE Manual De Instrucciones página 4

Compatible Handles
For general use
Works with C245 Cartridge range
General Purpose Handle
Ref. T245-A
Blue Handle
Ref. T245-PA
Non-slip Handle
Ref. T245-B
Soft Thermal Insulator Handle
Ref. T245-C
easily replace the Grips for T245-A and T245-C using the slip-on tabs (Ref. 0016057 Supplied with
4 grips).
1. Inserting tabs 2. Inserting handle
tabs
new grip
Insert the slide-on tabs into Push the grip with the tabs
the new grip. onto the handle.
6
Soft foam (Ref. 0016057)
Blue grip to easily distinguish it from other handles
Non-slip soft touch
Soft foam (Ref. 0016057)
3. Removing tabs
To remove the tabs, hold the
grip and pull them out. Use a
pliers if necessary.
Note: All models are supplied with a 1.5 m cable.
For precision use
Works with C210 Cartridge range
Precision Purpose Handle
Ref. T210-A
Blue Precision Handle
Blue grip to easily distinguish it from other handles
Ref. T210-PA
For greater demands
Important: Only work with C245 cartridges when used with a CD station.
For intensive soldering jobs requiring continued high thermal power. They feature good thermal
insulation and a screw which fixes the cartridge and prevents its rotation.
HD Purpose Handle HD Purpose Handle + 3m cable
Ref. T470-A Ref. T470-SA
Tri-lobed HD Handle
Ref. T470-ZA
For better handling of the tool.
Thermal Insulator HD Handle Thermal Insulator HD Handle + 3m cable
Ref. T470-FA Ref. T470-MA
Note: All models are supplied with a 1.5 m cable except those specified with 3 m.
w w w.jbctools.com
Foam
7