Using Multi-CD Players
4. Raise or lower the volume.
2
3
F
∞
A
23
DOWN
VOLUME
UP
5. Turn the source OFF.
SOURCE
Hold for 1 second
Playing Discs on a 50-Disc Type Multi-CD Player
When a magazine is loaded into a 50-Disc type multi-CD player, informa-
tion on all the discs in the magazine is read.
If you start playing a disc on a 50-Disc type multi-CD player before read-
ing of information on all discs has been completed, reading of information
stops part way through. This will prevent you from using a number of
functions. (If you try and use these functions, "NOT READY" is dis-
played.)
If this happens, reading of information begins again when you switch to a
component other than 50-Disc type multi-CD player.
Switching the Multi-CD Player
It is possible to connect up to three multi-CD players by means of a multi-
ple installation adapter. When two or more multi-CD players are installed,
their priorities must be specified. Follow the multi-CD player instructions
carefully, and set the address switches properly.
• Select the multi-CD player you want to use.
2
3
F
∞
A
23
DOWN
VOLUME
UP
31
VOLUME
[]
PGM
1
2
2
ATT
PGM
[]
ATT
M-CD 1 = M-CD 2 = M-CD 3