Tuner Operation
Entering the Function Menu
In this menu you can select tuner functions.
• Select the desired mode in the Function Menu.
5
2
3
F
∞
A
23
Each press
changes the Mode ...
Each press of the FUNCTION button selects the mode in the following
order:
BSM = REG* = LOCAL = TA* = PTY SEL* = AF*
* REG, TA, PTY SEL and AF are RDS functions for FM bands. You cannot switch
to these modes when selecting MW or LW band. Refer to "Using the RDS
Functions" for details and instructions on how to use these functions.
To cancel the Function Menu, press the BAND button.
Note:
• After entering the Function Menu, if you do not perform an operation within
about 30 seconds, the Function Menu is automatically canceled.
Local Seek Tuning
This mode selects only stations with especially strong signals.
1. Select the Local mode (LOCAL) in the Function Menu.
2. Switch the Local mode ON or OFF.
5
2
3
F
∞
A
23
To cancel the Function Menu, press the BAND button.
11
F
A
PGM
[]
Each press
changes the Mode ...
F
A
PGM
[]
"LOC"