Activating/Deactivating The Ta Function - Pioneer KEH-P6600R Manual De Operación

TA Function
The TA (Traffic Announcement standby) function lets you receive traffic
announcements automatically, no matter what source (tuner, cassette play-
er or multi-CD player) you are listening to. The TA function can be acti-
vated for either a TP station (a station that broadcasts traffic information)
or an EON TP station (a station carrying information which cross-refer-
ences TP stations).

7 Activating/Deactivating the TA Function

1. Tune in a TP or EON TP station.
The "TP" indicator lights when the tuner is tuned to a TP station, and both
the "EON" and "TP" indicators light when it is tuned to an EON TP sta-
tion.
2. Activate the TA function.
1 2 2 3
The "TA" indicator lights, indicating that the tuner is waiting for traffic
announcements.
Repeat the preceding operation when no traffic announcement is being
received to deactivate the TA function.
Note:
• You can also switch the TA Function ON/OFF in the Function Menu.
• Only the (+), (–), TA/AF, AUDIO, DISP and SOURCE buttons can be used dur-
ing traffic announcement reception.
• The system switches back to the original source following traffic announcement
reception.
• The TA function can be activated from the cassette player or multi-CD player
mode if the tuner was last set to the FM band but not if it was last set to the
MW/LW band.
• If the tuner was last set to FM, turning on the TA function lets you operate other
tuning functions while listening to a cassette or CD.
• Only TP or EON-TP stations are tuned in during the Seek Tuning mode when the
"TA" indicator is ON.
• Only TP or EON-TP stations are stored by BSM when the "TA" indicator is ON.
4
"TA"
18