Connecting the external timer
Connect the external timer (coin box, studio control)
according to the instructions supplied with the timer.
The following diagram shows the wiring requirements
with regard to the timer. The door contact is required if
you have opted for the booth-scenting feature.
Figure 9
aquaCool and Aroma
connections
AQUACOOL
The aquaCool box is equipped with a liquid-
①
level sensor
as well as with a connection to
the aquaCool canister
houses the compressor ensuring the compressed-
③
air supply
, and the Aroma box
connections.
Figure 10
②
①
1
Connector (liquid-level monitoring)
2
Connection to aquaCool canister
②
. Furthermore, the box
④
with its related
③
④
Compressor with compressed
3
air connection
4
Aroma box
AROMA
The Aroma box is attached within the aquaCool box
and equipped with three hose connections, one for
the compressed-air supply
⑥
Aroma nozzles
.
Figure 11
⑥
5
Aroma box (inlet)
6
Aroma box (outlets)
M a n u a l d e i n s t r u c c i o n e s | megaSun 7900
⑤
and two leading to the
⑤
⑥
α
lpha
11