Operation Using Different Audio Sources - KBL megaSun 7900 alpha Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operation using different audio
sources
The tanning unit can be operated using the following
audio sources:
An internal audio source
Various external audio sources
All available audio sources
The audio source can be chosen in advance via the
"preSelection" feature and then changed at any time
by using the interior control panel.
INTERNAL MP3 PLAYER
When using the internal MP3 player, you can either
play the music tracks that are originally supplied on
the SD card, or you can record your own tracks to
the SD card.
EXTERNAL AUDIO SOURCES
LINE-IN
As an external audio source, you can connect
devices ranging from the standard-line level to low
loudspeaker levels.
These sources comprise:
Studio music
External players such as MP3 players, mobile
phones (cell phones), I-pods, etc.
USB
You can connect a USB stick to a USB port that is
integrated in the canopy.
EXTERNAL 100 V AUDIO SIGNAL
FEATURE)
If you decide for a connection to a 100 V audio
system, you will need a transformer (KBL no.: 9100
0170 00) for the transmission of the audio signal.
This connection must be made by trained service
staff.
EXTERNAL PLAYERS & HEAD-/EARPHONES
A line connection has been integrated on the right-
hand side of the bench's head end so that the sunbed
user can connect his or her own player such as an MP3
player, an iPod, etc. Take hold of the jack plug and pull
the cable out of the opening. Then connect the jack
plug to the earphone jack of your player. Then select
"MP3 ext." as the audio source from the control pan-
el of the sunbed before you start playing your own
tracks from the player.
The tracks can only be selected via the user's own
player. The volume can be controlled via the control
panel of the sunbed and also via the corresponding
operating elements provided by the user's player.
Either a headphone or an earphone with a 6.3 mm
jack plug can be used. The corresponding connector
socket is located next to the line connector. The au-
dio signal is switched over automatically.
Figure 5
(OPTIONAL
M a n u a l d e i n s t r u c c i o n e s | megaSun 7900
MP3
ATTENTION
Danger of damage to the player due to
overheating.
Do not place your player within areas that are
directly exposed to UV radiation.
α
9
lpha

Publicidad

Tabla de contenido
loading

Tabla de contenido