Resetting The Operating Hours Of The Tubes; Time - KBL mon amie Manual De Instrucciones

3. Press START to invoke
time using the plus and minus buttons 2, 3, 7, 8.
Press START. Proceed in the same way for
BON BOF
and .
4. Press STOP to leave the menu.
Resetting the operating hours
of the tubes
Use the menu item
the operating hours of the collagen tubes to zero. Use
CPI / CPI RESET UV
the menu item
operating hours of the UV tubes to zero. These tube
hours must be reset after each replacement of tubes.
1. Select CPI with 5 (plus button) or 0 (minus button).
2. Select the desired type of tube
(plus button) or 0 (minus button).
3. Press START to open the
4. Keep 1 (plus button) pressed as long as necessary
to set the hours to zero.
5. Press START to save the settings, then exit the
menu using the STOP button.

Time

These settings must only be made by trained service
personnel!
26
M a n u a l d e i n s t r u c c i o n e s | mon amie
AON
and set the desired
CPI / CPI RESET COL
to reset the
COL / UV
RESET
function.
AOF
,
to reset
with 5