Maintenance And Cleaning; Instructions For Cleaning And Care - KBL mon amie Manual De Instrucciones

Maintenance and cleaning

Regular maintenance is required for the safe operation
of the tanning unit and must be documented.
Cleaning must be performed when necessary.
Live parts
Risk of fatal injury due to electric shock when
touching live parts.
•
Disconnect from mains and secure
against reconnection!
•
USE ONLY ORIGINAL SPARE PARTS.
•
Replace illuminants and fi lters only with ones
wich are characterized on the device.
Instructions for cleaning and
care
GENERAL
•
Before starting to clean the unit, take off any rings,
bracelets, watches, etc. that you might be wearing
in order to avoid scratching the surfaces.
•
Cleaning fl uid must not run into the appliance.
TUBES
•
To preserve the tanning power, we recommend
cleaning the tubes with warm water and a chamois
after approx. 200 hours of operation.
DANGER!
ACRYLIC PANES, GRAB HANDLES AND DOOR
HANDLES
•
If possible, use the special cleaning and
disinfectant agent "megaClean" supplied by KBL
for cleaning the acrylic parts and handles, and
dilute it in water at a ratio of 1:13.
VARNISHED AND PLASTIC PARTS
•
Use a damp soapy cloth to clean the varnished
and plastic surfaces.
•
Do not clean the large plastic parts with a dry
cloth. This might scratch the surfaces!
CHROMIUM-PLATED PARTS
•
Only clean with a damp chamois and a cleaning
agent for acrylic plastic (antistatic). Apply the
cleaning agent onto the chamois and not directly
onto the mirror surface.
CLEANING AGENTS
•
The surfaces and the acrylic panes must not
be cleaned with concentrated disinfectants or
solvents or other liquids that contain alcohol!
M a n u a l d e i n s t r u c c i o n e s | mon amie
29