Taking Photos; Continuous Shooting - LEXIBOOK DJ028 Serie Manual De Instrucciones

Single shooting
You are already in 'Single shooting' mode when you switch on the camera and the camera icon
appears. Press the Shutter button (13) to take a photo. The camera will beep to confirm that a picture
is taken. The number of pictures that you can take and store in the memory appears in the bottom
left-hand corner of the screen.
If you are not in 'Single shooting' mode because you have been using another mode, press the Menu
button (7) once. Press the Shutter button (13) repeatedly until you see the camera icon
the Menu button (7) to confirm.
Note: If there is not enough light to take a photo, 'Too dark' will appear on the screen. You need to
turn the flash on to take a photo. See the 'Flash function' section below for how to do this.

Continuous shooting

1. When you are in 'Single shooting' mode, press the Menu button (7) once.
2. Press the Shutter button (13) repeatedly until you see the continuous shooting icon
3. Press the Menu button (7) to confirm.
4. Press the Shutter button (13) to take three pictures continuously.
Note:
• When the camera's built-in memory is full, you will not be able to take any pictures.
• You cannot use the flash feature in 'Continuous shooting' mode.
Flash function
To use the flash, repeatedly press the Flash button (12) until your desired setting is shown by the
icon on the screen:
Note:
• When the flash is recharging,
until the red LED has turned off before you take your next photo.
• When batteries are low
Display button
You can turn off the LCD screen and use the viewfinder to select your photo. Press the Display button
(11) to turn the LCD screen on or off.
Inserting a photo frame
In the "Take a photo" mode, press once on the Up button (10). The screen will display an example of
a photo frame (to see other photo frame examples, press the Up button (10) again, and when you see
one that you like press the shutter-release button (13) to choose it and take the photo.
Note: the photo frame function cannot be used in video mode.
1. In 'Single shooting' mode, press the Menu button (7) once.
2. Press the Shutter button (13) repeatedly until you see the self-timer icon
12
DJ028seriesIM1182_V04.indb 12
A
Flash is on / Auto flash is on /
the flashlight does not work.

TAKING PHOTOS

Flash is off
or will flash on the screen and the red LED will turn on. Wait
A
SELF-TIMER
. Press
.
.
18/04/2012 4:49 PM
3. Press th
4. Press th
1. In 'Single
2. Use the
(13) repeat
High r
3. Press th
1. In 'Single
2. Use the
button (13)
High i
3. Press th
Note: Whe
is smaller. C
1. Switch o
2. Press th
3. Press th
4. Press th
bottom righ
5. Press th
6. To delete
Note:
• The flash
• Once dow
• The video