Single shooting
You are already in "Single shooting" mode when you switch on the camera (the
icon is displayed on screen). Press the Shutter key (7) to take a photo. The number
of pictures that you can take in memory is shown on the LCD screen.
Continuous shooting
1. When you are in "Single shooting" mode, press the "Power/Menu" button (1) once.
2. Then press the "next" button (11) once. The "Continuous shooting" mode
icon is displayed on the screen.
3. Press OK (10) to take 3 pictures continuously.
4. The camera automatically goes back to "Single shooting" mode. Follow steps 1 to
3 to enter "Continuous shooting" mode again.
Note: To use the flash in "Continuous shooting" mode, please activate the flash first
by pressing the "flash" button once, then follow steps 1 to 3.
Press the Flash button (2) to turn the flash on/off.
1. Press the "Power/Menu" button once. The "Self-timer" icon
screen.
2. Press OK (10) to start the 10-second countdown and take a photo.
3. The camera automatically goes back to "Single shooting" mode
1 to 2 to enter "Self-timer" mode again.
1. Press the "Power/Menu" button once, then use the PREVIOUS button (5) to select
the "Resolution" icon
2. Press OK repeatedly to select the desired resolution.
There are 3 resolution modes:
High resolution (5M) / Medium resolution (3M) / Low resolution (1.2M)
Note: When 3MP or 5MP is selected, FRAME is disabled.
3. Press the "Power/Menu" to go back to camera mode.
12
DJ140SW_IM1275_291_V08.indb 12
TAKING PHOTOS (Camera Mode)
FLASH FUNCTION
SELF-TIMER (CAMERA MODE ONLY)
SELECTING THE PHOTO RESOLUTION
.
is displayed on
. Follow steps
30/06/2015 12:45
1. Press t
"Image qu
2. Press O
There are
High
3. Press t
1. Press t
"Frequen
2. Press O
3. Press t
1. Press t
screen.
2. Press t
the LCD s
3. Press t
AVI forma
4. To go b
icon
Note:
• To use
button.
• You can
to play AV