Setting The Number Of Rings - Sony SPP-A973 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Setting the number of rings

You can select the number of times the phone rings before it answers
to take a message.
There are four modes: 2, 4, 6, and Toll Saver.
1
Press (MENU) repeatedly until you hear "Set number of
rings".
"- -" blinks on the display.
2
Press (SELECT) repeatedly to select a ring duration (2, 4, 6,
or Toll Saver).
To answer after 2 rings, select "2".
To answer after 4 rings, select "4".
To answer after 6 rings, select "6".
Select "Toll Saver" to answer after 2 rings when there are
new messages, and 4 rings where there are no new
messages.
3
Press (TIME/SET).
The ring duration setting is announced.
4
Press (PLAY/STOP) to exit the menu setup mode.
Notes
• When the number of rings is set to "Toll Saver", the phone answers after 2
rings if new messages are recorded. If no new message are recorded, it
answers after 4 rings. When you hear 3 rings, you will know that there are no
new messages. You can save the toll for the call when you pick up messages
from an outside phone.
• The number of rings is preset to 4 rings.
continued
Answering Machine Features
33
US

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido