Entering The Area Code - Sony SPP-A973 Manual De Instrucciones

Step 4

Entering the area code

When you use this phone for the first time, or move to an area that has a
different area code, you must enter your home area code. Otherwise, you
cannot use some functions of this phone and the Caller ID functions.
This is also necessary because the phone must be able to select an area code to
properly dial call from the Caller ID list.
Depending on your region, enter 3-digit area code as follows:
Case 1.
If 7-digit dialing (no area code) is accepted for local calls in your area, see "To enter
your home area code" below.
If you live in an area where calls from or to other local areas can also be made by 10-digit dialing
(area code + number), you can register up to 5 local area codes with this telephone to take
advantage of this system. See "To enter the local area code (For 10 digits phone number users)"
on page 15.
Case 2.
If 10-digit dialing (area code + number) is required for all local calls in your area, at
first, enter "000" in your home area code. See "To enter your home area code" below.
Then see "To enter the local area code (For 10 digits phone number users)" on page
15.
To enter your home area code
Turn
14 US
Getting Started
Press
1
Press (PGM).
2
Turn Jog Dial up to make "AREA"
flash.
DIRECTORY AREA
RINGER
3
Press Jog Dial.
HOME LOCAL
4
Press Jog Dial again.
"ENTER AREA CODE" appears on
the display.
5
Enter three digits of your home area
code using the dialing keys.
6
Press (PGM).
You will hear a long confirmation
beep.