ENGINE
23 Gross HP Briggs & Stratton
Model
Professional Series
Horsepower
23 Gross HP @ 3600 rpm
Displacement
44.2 cu in. (724 cc)
Electrical System
Alternator: 9 amp Regulated,
Battery: 12V-230 CCA
Oil Capacity
64 oz (1,9 L)
Engine Oil
Synthetic 5W30
Spark Plug Gap
0.030 in. (0,76 mm)
Spark Plug Torque
180 in-lbs (20 Nm)
Fuel Tank Capacity
Capacity: 4.0 gal (15,1 L)
27 Gross HP Briggs & Stratton
Model
Professional Series
Horsepower
27 Gross HP @ 3600 rpm
Displacement
44.2 cu in. (724 cc)
Electrical System
Alternator: 9 amp Regulated,
Battery: 12V-230 CCA
Oil Capacity
64 oz (1,9 L)
Engine Oil
Synthetic 5W30
Spark Plug Gap
0.030 in. (0,76 mm)
Spark Plug Torque
180 in-lbs (20 Nm)
Fuel Tank Capacity
Capacity: 4.0 gal (15,1 L)
CHASSIS
Seat
Mesh, Suspension
Seat Adjustment
9-Position
Turning Radius
14 in. (35,6 cm)
Front Wheels
Tire Size: 15 x 6.0/
Inflation Pressure: 12-14 psi (0,82 -0,96 bar)
Rear Wheels
Model NXT 2346
Tire Size: 20 x 10.0-8
Inflation Pressure: 10 psi (0,68 bar)
Model NXT 2752
Tire Size: 22 x 9.5-12
Inflation Pressure: 10 psi (0,68 bar)
Engine Power Rating Information
The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive
Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained
and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower
values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other things, ambient
operating conditions and engine-to-engine variability. Given both the wide array of products on which engines are placed
and the variety of environmental issues applicable to operating the equipment, the gas engine will not develop the rated
gross power when used in a given piece of power equipment (actual "on-site" or net horsepower). This difference is due to
a variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump,
etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability.
Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this
Series engine.
Replacement Parts
We recommend that you see an authorized Snapper/Briggs &
Stratton Dealer for all maintenance and service of the tractor/
engine and parts.
TRANSMISSION
Make
Type
TM
, V-Twin w/EFM
Ground Speed
Drive
Brakes
MOWER DECK
Cutting Width
Model NXT 2346
Model NXT 2752
Base Deck Platform
Number of Blades/Type
TM
, V-Twin w/EFM
Frame Suspension
Deck Support Wheels/Number Standard, 4 Anti-Scalp Wheels
Height-of-Cut
Mower Lift
Cutting Positions
DIMENSIONS
Overall Length
Overall Width (with deflector)
Model NXT 2346
Model NXT 2752
Overall Height
Accessories
For a list of the available accessories, see an authorized Snapper
Dealer. You can contact Customer Service by phone at (800) 317-
7833, or locate a dealer on the Internet at www.snapper.com.
en
Specifications
Tuff Torq® K46
Foot Pedal Hydrostatic
Forward: 0-5.6 MPH (0-9,0 km/h)
Reverse: 0-3.5 MPH (0-5,6km/h)
Belt
Manual
46" (116,8 cm)
52" (132,1 cm)
Side Discharge
3, Standard Lift
Frame Hung
1.5" to 4.0" (3,8 to 10,2 cm)
Electric Height-of-Cut
Infinite
71" (180 cm)
59" (150 cm)
65" (165 cm)
45" (114 cm)
Parts and Accessories
31