Camera Viewing - Dedicated Micros system sprite Guia Del Usuario

Camera Viewing

The System Sprite can be setup to view all cameras or selected
cameras. All the cameras are viewable by default (Upper menu).
All cameras removed from viewing will not be seen on the main or
spot monitors during "Live" or "Play" modes. Camera recording will
continue as per the recording menu page 14.
To change the cameras to be viewed:
1. Press the Up cursor key to change the edit field to Selected
cameras.
2. A menu will display the cameras to be viewed. (Lower menu).
3. Press the camera key to toggle the camera in or out of the
viewed sequence. This camera will be displayed behind the
menu. (Cameras in the view sequence are denoted by a filled
box).
In the example shown camera 14 is hidden from view.
Œ
To Navigate Use the UP/Down keys to select Option
To Exit
Press the
MODE
Version 1.0
View
16:49:52
View
16:49:52
•
Use the Right key to enter Edit Field
or
key to select next Menu Press and Hold the
Camera Viewing
All cameras
04/03/1999
Camera Viewing
Selected cameras
Use camera keys to edit
1 2 3 4 5 6 7
n n n n n n n
9 10 11 12 13 14 15
n n n n n o n
04/03/1999
Ž
Use the Up/Down keys to edit.
key to leave menus.
MODE
Camera Viewing
VEXT
8
n
16
n
VEXT
15