System Sprite Rear Panel - Dedicated Micros system sprite Guia Del Usuario

System Sprite Rear Panel

1. Earth screw.
2. Video external pulse (VEXT) and Alarm Relays R1 and
R2 contact connections.
3. VCR input connector, connected to the VCR's playback
output connector.
4. Main monitor output, composite signal.
5. Nine or sixteen camera connectors, composite signal.
6. Nine or sixteen camera loop through connectors,
composite signal. If used the 75
disconnected in software.
7. Spot monitor output, composite signal.
8. Video out, composite record signal to the VCR.
9. Main monitor S-VHS signal, Colour duplex models
only.
10. VCR S-VHS out, record signal to the VCR. Colour
models only.
Version 1.0
11. VCR S-VHS in, playback signal from the VCR. Colour
models only.
12. Dedicated Micros c-bus connectors, one of these two
connectors is used for the optional System Controller
keyboard. They are also used to simplify the connection
of compatible components enabling flexible networks to
be build using multiple multiplexers and controllers.
13. Power connector, the supplied power supply is
connected here.
Ω
termination can be
System Sprite Rear Panel 5