WAGNER 2600 Manual Del Propietário página 2

Explosion hazard - Incompatible materials.
May cause property damage or severe
injury.
• Do not use bleach.
• Do not use halogenated hydrocarbon
solvents.
• Halogenated hydrocarbon solvents such as
methylene chloride and 1,1,1 - Trichlorethane
are not compatible with aluminum and may
cause an explosion. If unsure of a
materialÕs compatibility with aluminum,
contact your coatings supplier.
General - May cause property damage or
severe injury.
• Read all instructions and safety precautions
before operating any equipment.
• Comply with all appropriate local, state and
national codes governing ventilation, fire
prevention, and operation.
• The United States Government Safety
Standards have been adopted under the
Occupational Safety and Health Act (OSHA).
These standards, particularly Part 1910 of
the General Standards and Part 1926 of the
Construction Standard should be consulted.
• This equipment is designed to be used with
authorized parts only. When using this
equipment with parts that do not comply with
the minimum specifications and safety
devices of the equipment manufacturer, the
user assumes all risks and liabilities.
• Check all hoses for cuts, leaks, abrasion or
bulging of cover, as well as damage or
movement of couplings before each use. If
any of these conditions exist, replace the
hose immediately. Never repair a paint hose.
• Never aim the spray gun at any part of the
body.
R
English
WARNING
Hazardous vapors - Paints, solvents,
insecticides, and other materials may be
harmful if inhaled causing severe nausea,
fainting, or poisoning.
• Use a respirator or mask whenever there is a
chance that vapors may be inhaled. Read all
instructions with the mask to insure that it will
provide the necessary protection against the
inhalation of harmful vapors.
Explosion or fire Hazard - Solvent and paint
fumes can explode or ignite causing property
damage and or severe injury.
• Exhaust and fresh air introduction must be
provided to keep the air within the spray area
free from accumulation of flammable vapors.
• Avoid all ignition sources such as static
electricity, open flames, pilot lights, hot
objects, cigarettes, and sparks from
connecting and disconnecting power cords
and working light switches.
• Keep the motor away from spray area to
avoid solvent and paint fumes. Motor
contains arcing parts which emit sparks.
• Fire extinguishing equipment must be
present and in working order.
• The power cord must be connected to a
grounded circuit.
• Follow the material and solvent
manufacturer's safety precautions and
warnings.
Skin burn Hazard - Heated parts can cause
severe skin burn injury.
• Quick disconnect fittings on the hose and
spray gun become hot during use. Avoid
skin contact with quick disconnect fittings
when they are hot. Allow quick disconnect
fittings to cool before disconnecting the spray
gun from the hose.
2 © 1999 Wagner Spray Tech - All rights reserved.