Craftsman 320.17255 Manual De Operaciones página 16

LED WORKLIGHT AND
"LIVE TOOL INDICATOR" LED LIGHT (Fig. 8)
LED WORKLIGHT
Your sabre saw has an LED worklight that
turns "ON" automatically when the saw is
plugged into a power source. The light helps
provide easy visibility of the cutting line.
Fig. 9
I
"LIVE TOOL INDICATOR" LED LIGHT (Fig. 9)
Your saw has a "Live Tool Indicator" green LED light
that turns "ON" automatically when the saw is plugged
into a power source. The light is located on both sides
of the base of the trigger switch handle near the body of
the saw.
POWER ON-OFF TRIGGER SWITCH and POWER "LOCK-ON" BUTTON (Fig. 10)
1. Connect the plug of your saw to
a standard household power outlet.
2. Start the tool by squeezing the
on/off trigger switch (see Fig. 10).
3. To stop the tool, release the on/off
trigger switch.
4. To lock the on/off trigger switch in
the "on" position, press trigger
switch and while holding it "on",
press in the lock-on button, located
on the left side of the handle
(see Fig. 10).
5. The power lock-on button allows the
operator to keep the sabre saw
running without squeezing the trigger
switch. This is useful for continuous
sawing applications.
6. To release the power lock-on button,
press and release the trigger switch.
This will turn the tool off.
Trigger Switch
Lock-on Button
Fig. 10
/_ WARNING"
If the lock-on button is continuously being depressed, the
trigger switch cannot be released.
16