Kenmore 125.10701610 Manual De Uso página 16

WARNING
Always unplug power cord from
electrical outlet before replacing
exhaust filter.
Under normal usage, the HEPA media exhaust
filter will require replacement once every
year. However, vacuuming large amounts of
extremely fine dust or similar material over
a long period of time may decrease airflow
performance through the filter. If this occurs,
it may become necessary to replace the
HEPA media exhaust filter more often.
To assure the best results, it is recommended
to change the filter at least once a year.
1. Open the
Filter
Cover
filter cover
by pressing
the release
latch at the
bottom of the
filter cover and
lifting out and up.
2. Remove the HEPA media exhaust filter.
REPLACING EXHAUST FILTER
Release Latch
3. Install a new
HEPA media
exhaust filter,
by inserting tabs
on the bottom
of the filter into
the slots in the
canister and
pressing into place.
NOTE: Be sure the HEPA media exhaust filter
is inserted in the right direction with the seal
facing the canister.
4. Reinstall filter cover by inserting tabs on
the top of the filter cover into the slots on the
canister. Press into place and be sure release
latch snaps into place.
Tabs
- 16 -
Slot
Tabs
Slots