Cleaning Secondary Filter - Kenmore 125.10701610 Manual De Uso

WARNING
Always unplug power cord from
electrical outlet before cleaning
secondary filter.
1. Remove the
dust bin (See
CLEANING,
DUST BIN
page 14).
2. Remove the secondary
filter and rinse with water.
DO NOT wash in the
dishwasher.

CLEANING SECONDARY FILTER

Secondary
Filter
3. Once the filter is washed clean, squeeze
by hand and allow to air dry.
4. Allow filter to dry 24 hours before putting
back into vacuum cleaner. DO NOT install
damp.
5. Reinstall secondary filter. DO NOT
operate without filter installed.
6. Reinstall dust bin.
NOTES:
• If filter is torn or perforated, replace it
before using vacuum.
• When the cleaning of the filter no longer
restores vacuum cleaner suction to full
power, replace the filter.
- 17 -