Transportation, Storage And Disposal; To Safely Attach The Product On A Trailer For Transport - Husqvarna P 520DX Manual De Usuario

Transportation
• The product is heavy and can cause crush injuries.
Be careful when you load it onto or off a vehicle or
trailer.
• Use an approved trailer for transportation of the
product.
• Make sure that you have knowledge of local road
traffic regulations before transportation of the
product in a trailer or on roads.
To safely attach the product on a trailer for
transport
Before you attach the product, you must read and
understand the safety chapter. Refer to
on page 14 .
WARNING:
sufficient to lock the product during
transport. Attach the product tightly to the
load area.
Equipment: 4 approved straps and 4 wheel chocks.
1. Park the product in the center of the load area.
WARNING:
transport vehicles with a cover. Make
sure that the product is cool before you
put the product in the transport vehicle.
2. Make sure that the center of gravity of the product is
above the wheel axle of the transport vehicle. If a
trailer is used for transport, make sure that the down
force on the tow bar is correct.
3. Apply the parking brake.
54

Transportation, storage and disposal

Transport safety
The parking brake is not
For transport in
4. Lower the cutting deck to the float position.
5. Remove all loose objects.
6. Put the first strap through the rear transmission
frame.
7. Put the second strap through the rear transmission
frame.
8. Attach the straps to the load area.
9. Tighten the straps rearward to attach the product to
the load area.
10. Attach the third strap to 1 of the transport eyelets.
11. Attach the fourth strap to the other transport eyelet.
12. Attach the strap to the load area.
13. Tighten the strap forward to attach the product to the
load area.
1593 - 002 - 22.12.2020