To Operate The Cabin Heat; To Stop The Engine - Husqvarna P 520DX Manual De Usuario

To operate the cabin heat

1. Engage (A) and disengage (B) the cabin heat with
the valve on the hose to the right of the forward
pedal.
ON
A
OFF
B
2. Turn the airflow adjuster to set the airflow (0–3).
3. Pull the circulation lever to the right (A) to engage
the air circulation throttle. Pull the circulation lever to
the left (B) to disengage the air circulation throttle.

To stop the engine

1. Park the product on level ground.
2. Apply the parking brake.
3. Push the PTO button to disengage the drive on the
cutting deck.
1593 - 002 - 22.12.2020
4. Push the lever for the hydraulic lift arms forward to
lower the cutting deck to the ground.
5. Move the throttle control forward to the low speed
position.
6. Turn the ignition key to the STOP position.
A
7. At the end of operation, or when you do
maintenance on the product, turn the main switch to
the OFF position.
B
ON
25