Maintenance - EWT CS 3 Modo De Empleo

1
1. Verify that the power cord is disconnected from the outlet (Fig. 1).
2. Disconnect the hose from the container (Fig. 2).
3. Undo the clasps and remove the top section from the container (Fig. 3).
4. Clear all dirt or debris from the container and hose (Fig. 4).
5. Clean the foam filter or dust filter by washing it with a mild soapy solution (Fig. 5).
IMPORTANT! Clean or change the cloth filter regularly for best
performance. ALWAYS USE CLOTH FILTER FOR DRY
VACUUMING. If the machine is used without the cloth filter, the
motor will burn out and the warranty will be voided. Always
keep spare filters on-hand.
NOTICE! The filters included are made of high quality materials
designed to stop small dust particles. The cloth filter should be
used for dry pick-up only. A dry cloth filter is necessary to pick
up dust. If the cloth filter is 28 wet, it will clog quickly and be
very difficult to clean. Handle the filter carefully when removing
it for cleaning and replacing it. Check the filters for tears or
small holes, a small hole can let dust pass through and out of
the cleaner. Do not use a filter with holes or tears, replace it
immediately.
WARNING! ALWAYS DISCONNECT THE PLUG FROM THE
POWER OUTLET BEFORE REMOVING THE POWER HEAD
FROM CONTAINER.

MAINTENANCE

2 3
4
38
5