Kit Assembly; Din Head Unit Provision With Pocket - Metra 99-7953 Instrucciones De Instalación

DIN head unit provision
1. Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper mating
adapters from Metra and/or AXXESS.
2. Slide the DIN cage into the radio
housing and secure by bending the
metal locking tabs down. (Figure A)
3. Slide the aftermarket head unit into the
cage until secure. (Figure B)
4. Reassemble dash in reverse order
of disassembly.

Kit Assembly 99-7953

with pocket
4
(Figure A)
(Figure B)