Dash Disassembly; Kit Assembly; Double Din Radio Provision - Metra 95-5026 Instrucciones De Instalación

Dash Disassembly

Lincoln Aviator
2003-2005
(Figure D)
(Figure E)
1. Slide the appropriate bracket into
the trim plate aligning the holes in
the trim plate to the clips on the
bracket. (Figure A)
2. Slide the double DIN radio into the
trim plate bracket assembly and
secure the radio to the kit using
the screws supplied with the radio.
(Figure B)
3. Position the rear support bracket
with slide grooves facing down
and secure to the back of the radio
with the hardware supplied with
the radio. (Figure C)
Note: Navigator DIN and ISO radio
kit assemblies, you must cut the
rear support bracket for clearance.
(Figure D)
4. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the radio for proper operation.
5. Reassemble dash in reverse order
of disassembly.

Kit Assembly 95-5026

Double DIN radio provision

(Figure A)
(Figure B)
5
Rear view
Double DIN radio
(Figure C)
(Figure D)